optek technology inc.? 1645 wallace drive, carrollton, texas 75006 phone: (800) 341-4747 fax: (972) 323? 2396 sensors@optekinc.com www.optekinc.com issue a 05/2013 page 1 of 5 fiber optic receiver opf500 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. applications ? industrial ethernet equipment ? copper-to-fiber media conversion ? intra-system fiber optic links ? video surveillance systems opf500 series ? interfaces with all logic circuits ? two output options ? optimized for fiber optic applications using 50 to 200 mi- cron fibers ? data rate to 200kbps nrz ? available with multiple packaging options the opf500 series receiver contains a monolithic integrat ed circuit which incorporates a photodiode, linear ampli- fier, a voltage regulator, and a schmitt trigger on a single silicon chip. these receivers are designed for short haul fiber optic systems using 850 nm leds such as optek?s opf300 series. these devices feature ttl/lsttl compat ible logic level output. an internal voltage regulator allows operation with supply voltages ranging from 4.5v to 16v. rohs this component is susceptible to dam- age from electrostatic discharge (esd). normal static precautions should be taken in handling and assembly of this component to prevent esd damage or degradation. part number description opf500 buffer, 10kw pull-up plastic cap component opf505 buffer, 10kw pull-up metal can component opf507 buffer, 10kw pull-up metal st receptacle opf510 inverter, 10kw pull-up plastic cap component opf512 inverter, 10kw pull-up metal st receptacle part ordering information
fiber optic receiver opf500 series optek technology inc.? 1645 wallace drive, carrollton, texas 75006 phone: (800) 341-4747 fax: (972) 323? 2396 sensors@optekinc.com www.optekinc.com issue a 05/2013 page 2 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. electrical/optical characteristics 4.5 v v cc 16.0 v, t a = 25 c ? unless otherwise specified absolute maximum ratings storage temperature -65 c to +100 c operating temperature -40 c to +85 c lead soldering temperature (for 10 seconds) 260 c supply voltage 18 v sinking current 16 ma power dissipation 200 mw open collector power distribution 40mw voltage at output 30 v symbol parameter min typ max units condi- tions v cc supply voltage 4.5 16.0 v v oh high level output voltage vcc - 1.5 v buffer: p in > 2.0 w inverter: p in < 0.1 w v ol low level output voltage 0.4 v buffer: p in < 0.1 w inverter: p in > 2.0 w i cc supply current 5.0 12.0 ma no output load p in input sensitivity 2.0 w t r rise time 300 100 ns buffer inverter p in = 1.5 w (peak) v cc = 5.0 v t f fall time 300 100 ns inverter buffer pwd pulse width distortion 10 % 1 w < p in < 100 w, f = 20 khz 50% duty cycle p = 850 nm bw bandwidth 100 khz p in > 2.0 w, 50% duty cycle rohs
optek technology inc.? 1645 wallace drive, carrollton, texas 75006 phone: (800) 341-4747 fax: (972) 323? 2396 sensors@optekinc.com www.optekinc.com issue a 05/2013 page 3 of 5 fiber optic receiver opf500 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. mechanical outline ? opf500, opf510
fiber optic receiver opf500 series optek technology inc.? 1645 wallace drive, carrollton, texas 75006 phone: (800) 341-4747 fax: (972) 323? 2396 sensors@optekinc.com www.optekinc.com issue a 05/2013 page 4 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. mechanical outline ? opf505
optek technology inc.? 1645 wallace drive, carrollton, texas 75006 phone: (800) 341-4747 fax: (972) 323? 2396 sensors@optekinc.com www.optekinc.com issue a 05/2013 page 5 of 5 fiber optic receiver opf500 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. mechanical outline ? opf507, opf512
|
